Expert Answers about Dutchmen Coleman Lantern TT Toy Hauler

• Will Stromberg Carlson RV Exterior Ladder Fit a Toy Hauler
• The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 is a universal fit so it will work great on your 2017 Coleman 250TQ Toy Hauler as it can go on the side or rear of your trailer. This ladder measures 12" wide and is 99-1/2" tall but you can customize its height by trimming the legs with a tube cutter or hacksaw and you only need to be sure you know the locations of your Coleman's blocking or sub frame so you can properly mount it, as you can see by the cut out of the linked...
  view full answer...


• Wind Sensor For Solera Smart Arm 12V Power RV Awning
• There is an option to add a wind sensor to the Solera Smart Arm 12V Power RV Awning - 16' Wide - Programmable - Black Fade # LC517486. All you need for this is the Wind Sensor for Solera Smart Arm 12V Power RV Awnings # LC715123. The only other thing you may need is two of the Awning Rail # LC715217, unless you already have the rail (which you will if this is a replacement and not adding a new awning). Also keep in mind the auto level you have won't control the awning, as its Smart Arm...
  view full answer...


• Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
• The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the # 8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the # LC66WD, or for self-adjusting brakes # K23-478-479.
  view full answer...


• Torque for 1/2 inch Diameter Wheel Stud Trailer Lug Nuts
• 100 ft lbs would be good for the 1/2 inch diameter lug nuts on your trailer.
  view full answer...